Youngpool Technology's Splicing Machine is widely used in the SMT industry, primarily for the automatic splicing of tape reels on chip shooter to enhance production efficiency. Below are the detailed steps and professional recommendations for using Youngpool Technology's Splicing Machine to help you operate and maintain the equipment more effectively.

I. Equipment Installation and Preparation

1. Equipment Installation:

- Place the Splicing Machine on a stable surface, ensuring it is level to avoid vibrations.

- Connect the power supply (220V/50Hz) and ensure proper grounding.

2. Power-On Inspection:

- Turn on the power switch.

- Check if the display screen is functioning normally and if all indicator lights are on.

- Confirm that there are no abnormal alarms.

- Open the software and click the 【Reset】 button for the device to perform a self-check.

II. Operating Steps

1. Scanning:

- Scan the QR codes of the new and old tape reels.

- Set the tape width and pitch (e.g., 8mm, 12mm, 16mm, 24mm) on the touchscreen according to the tape type.

2. Tape Placement:

- Place the old and new tapes into the left and right tape slots of the Splicing Machine, respectively.

- Ensure the tapes are flat and free from twists or jams.

3. Initiating Splicing:

- Press the "Start" button, and the device will automatically perform the following operations:

- Detect the tape position.

- Cut the ends of the old and new tapes (with the empty tape detection function enabled to ensure the spliced tape contains material).

- Automatically pick up the adhesive film to splice the new and old tapes together.

- After splicing, the device will automatically eject the spliced tape.

4. Inspecting Splicing Quality:

- Check if the splice is secure and if the adhesive tape is properly bonded.

- Ensure there is no misalignment or skewing after splicing.

5. Tape Collection:

- Place the spliced tape onto the collection reel and press the collection button to assist in winding (manual winding is possible for small amounts of material).

- Load the spliced material onto the placement machine for production line use.

Conclusion

Youngpool Technology's Splicing Machine is a critical device in the SMT production line. Mastering its operation can significantly improve production efficiency and reduce downtime. By following standardized procedures, performing regular maintenance, and addressing faults promptly, you can ensure the device operates stably over the long term, providing reliable support for production. In the next section, we will introduce how to perform regular maintenance on the Splicing Machine.

If you have further questions or require technical support, it is recommended to contact Youngpool Technology's after-sales service team directly for professional assistance.